Since the hummer doesn't have much of a wiring harness and I have no speed sensor I have no way of knowing my speed. I picked up this GPS speedometer/odometer from Speedhut. Installation was simple, it works killer and its American made.
Metal fabrication shop located just outside of Grants Pass Oregon. We specialize in Dodge and Ram truck, repair and modification. From lift kits and suspension to full blown frame off builds. We also build headache racks, bed rails and flatbeds.
Sunday, June 23, 2013
Wednesday, June 19, 2013
Tires
A couple posts back you may notice the dodge is rocking the 37" tires that were on the hummer. These are what are currently on the hummer. 36" military surplus tires.
Tuesday, June 18, 2013
Lights
I have grown tired of my ghetto headlight knob setup. I purchased a 7/16-20 bolt, machined down the head drilled it out and shortened it. I also shortened the plastic knob so I would have the proper reach. I then chased the threads on the receiving part of the unit and assembled everything.
Monday, June 17, 2013
Jacked up
Apparently my hmmwv jack cant hold up to civilian vehicles. I tried to lift the front of the dodge (during the recent tire change) and the jack broke. I made a run to sears and picked up this bottle jack and it did the job beautifully.
Sunday, June 16, 2013
37s
Well once I had the fenders cut the 36s had tons of room, so much in fact i took the 37s off the hummer and put them on the dodge. I only drive the hummer about once a month anyways and the 37 are damn near new. The 36s are military issue hmmwv surplus as well so its not too much of a crime.
Subscribe to:
Posts (Atom)