Sunday, May 30, 2021

1991.5 W250

There is 8 years of posts on my Instagram page. I have to tally up a list of upgrades and milage/dates of parts installed. This was originally a California truck and has no significant rust damage. 

16.5 x 14" wide weld wheels
37x12 R16.5 Kevlar Goodyear MTR tires
3.55 gears (limited slip rear)
DNR potentiometer (overdrive upgrade)
Rebuilt, tuned injection pump (2020) 

Killer dowel pin has been tabbed

New front main seal (2020)

New rear main seal (2020)

Billit tappet cover 

Custom self draining catch can

Denny T stage 2 fule pin

Magniflow 4" exhaust

Rebuilt transmission (2012) 

New transmission pump (2020)

Bands adjusted, trans flushed, aftermarket trans coolers mounted up front (2020)

B&M aluminum deep pan (with sensor)  
Rebuilt transfer case
Gorend low stall torque converter
BD diesel SFI certified billet flexplate
Rebuilt drive shaft (front)
Rebuilt front axle all spicer components 
Rebuilt rear axle all spicer components 
Rear disc conversion (with parking brake)
All new brake calipers (2020)
New brake booster (2020)
New master cylinder (2020)
New soft brake lines up front (2020)
DCEC second gen high flow lift pump (with first VE pressure spring) (2020)

Mile marker SS locking hubs

AFE air filter 

Custom battery tray, dual batteries 

Crossover steering (double bent draglink)
EBC yellow stuff towing brake pads
Red head steering box (15:1 ratio) installed 2019
New power steering pump (2018)
Harness seats
4th gen center seat/console
Entire cab has been sound deadened
New carpet 

Floor mount cup holders 

2013 charger steering wheel (horn works, other buttons do not)

9"touch screen 

Back up camera 

Sound system (Rocksford Fosgate) 0 gauge primarily wire,  bass controler

2012 Ford super duty grab handles installed on both A pillars

Passenger door window motor linkage assembly converted to modern style cable driven (have conversion kit for driver side, just not installed) 

Factory gauges have been taken apart, cleaned, all bulbs replaced with dim-able leds. Factory speedometer removed and replaced with correct size SpeedHut GPS speedometer odometer (I have original speedometer odometer as well)

Boost, pyro and trans gauges installed in a custom gauge pod on the dash

12 volt outlet on the end of dash gauge pod. So GPS unit can be used with out wires hanging down across the front of the dash

I also have stuff I haven't installed yet

Skyjacker soft ride leaf springs (front)

3rd gen rear leaf springs with Thuren soft ride leaf packs already installed

RuffStuff shackle flip flip kit with all hardware and bushings 

Truck currantly has a shackle flip in the rear but it's still OEM shackle (just flipped)

Truck currantly has LE tailgate installed but I also have a stamped tailgate as well.

New (2018) tail lights and blinker lights

7" led projector round headlight conversion 

Aftermarket grill (2016)

Custom front and rear bumpers

U-haul tow hitch 

New 7 pin mounted connector (2020)

Custom bed rails and headache rack (2020)

Rigid job box (feet removed, bolted to bed back) custom hidden brackets. 


Everything under the truck has been removed thouraly cleaned and painted with rust stop paint. All kinds of other small mods as well