I like the 3 seat setup vs a bench seat. I have two grey bucket seats left over from my hummer build. I also picked up this middle seat from pick n pull for $20
Metal fabrication shop located in Merlin Oregon. We specialize in Dodge and Ram truck, repair and modification. From lift kits and suspension to full blown frame off builds. We service and repair all major brands or truck as well as equipment. We offer onsite welding and troubleshooting. We also build headache racks, bed rails and flatbeds.
Wednesday, February 27, 2013
Monday, February 25, 2013
DD
Well I paid a little attention to the daily driver recently. My old tool box would not open or close properly due to the fact it was literally falling apart. So out with the old in in with a new smaller lighter working unit.
Sunday, February 17, 2013
Hubs
So I got a killer deal on a pair of mile marker hubs. All stainless steel and hardened steel vs plastic & aluminum.
Wednesday, February 6, 2013
Headliner
If any of you out there ever driving a truck owned by a smoker, you would know about the sagging headliner. Well I for one don't appreciate the headliner drooping down like six inches. So I tore off the sagging fabric and opted for some spray on rubber.
Thursday, January 31, 2013
Starting issues
The other day ole blue wouldn't start (wouldn't crank over). I threw the battery charger on and it showed a very low charge. I charged it all day and it barley started. I drove on the freeway for a bit just to warm up the motor and charge the battery a bit more. When I got home I turned off the truck and went to restart and nothing... The motor wouldn't even turn over, I threw the charger back on and the battery was dead.
The battery was swapped out for a new one but still no start. I pulled the starter motor, this entailed hours of scraping away sludge, soaking the bolts, a breaker bar, a handful of extensions, a 12 point 10mm socket (not 12 point 3/8'' I tried for a quite a bit) punching the frame, motor and front axle as they broke loose and it was off. I took it in to auto zone for testing and left with a new one. After all this nonsense she fires up right away!
The battery was swapped out for a new one but still no start. I pulled the starter motor, this entailed hours of scraping away sludge, soaking the bolts, a breaker bar, a handful of extensions, a 12 point 10mm socket (not 12 point 3/8'' I tried for a quite a bit) punching the frame, motor and front axle as they broke loose and it was off. I took it in to auto zone for testing and left with a new one. After all this nonsense she fires up right away!
Thursday, January 24, 2013
Saturday, January 19, 2013
Diff
I pulled the diff covers, changed the oil and gaskets on both diffs. Good thing I did there was water in the oil in the front diff and the rear was very dirty.
Subscribe to:
Posts (Atom)













































