Monday, May 4, 2015

Window problems

We have been having problems with Thomas's driver window for months. We have replaced the motor put it in with the spring 4 different ways. Its always the same problem it will roll down but not up. We picked up first gen driver a door off of craigslist with a manual window crank. We are going to swap over the internals. We have spent way to many hours messing with the currant set up. Hopefully going manual will solve the problem.
Since my kings are traditional style and not pin top the factory shock mount will not work. I drew up a new shock tower and gave them to a friend of mine who runs industrial laser cutters for a living and he whipped these up for me.

Saturday, May 2, 2015

Miller time

I have been wanting to buy a decent MIG welder for a while now. I finally bit the bullet and bought this little guy. I am exited about having shielding gas as well as the ability to weld 3/8" thick material. First order of business was to build a cart for the machine and bottle.

Tuesday, April 28, 2015

Axle pt34

I installed the knuckles and axle shafts tonight. I had to remove the spinal, rock guards and caliper brackets so I could mount the knuckle and slide the shafts through  the opening. I was in such a hurry putting the passenger knuckle on that I forgot to line up the plastic bushing with the slot in the knuckle. So I pulled the cap off, removed the silicon, lined up the bushing, reapplied more silicon and bolted the cap back on. Also I am still working on my house, the last pic is the first wall with insulation and proper sheet rock in my garage. I also picked up an older craftsmen tool chest recently. I took it all apart and cleaned everything, removed the casters and re installed them with larger hardware (missing and damaged hardware as well as a frozen wheel). I have been amassing more tools and it will be nice to have a home for them.

Monday, April 27, 2015

Axle pt33

When I cleaned up the king pin parts I noticed that one of the shims that goes on the bottom of the spring was broken. I decide to replace them both. After visiting all the local parts store I came up with nothing... so I made my own. I welded a couple washes together. A large one on the bottom in that will sit between the spring and  the kingpin bushing and a smaller one on top to keep it centered. I also painted the top and bottom caps gloss black engine enamel. 

Saturday, April 25, 2015

Axle pt32

With the defective u-joints out I took some 220 grit sandpaper and cleaned up the u-joint mounting surfaces before applying a thin layer of grease and pressing the new u-joints in. They took quite a bit of force to press in but were easier than the defective ones. 

Axle pt31

Anytime I rush something or settle, it comes back to bite me in the ass, u-joints are no exception.
The autozone u-joints were a little too tight and when "persuaded" to fit the last one cracked... I'm glad this happened now while everything is apart. So I had to remove them drop $120 on a pair of Spicer ones.   

Wednesday, April 22, 2015

Shocks pt1

Since I have been putting some serious money into the front axle I figured I might as well have nice shocks as well. Here are my Stage 3, 10" Thuren built King 2.5 shocks. The 2.0 fox shocks will go on Thomas's first gen dodge. I also plan on building a pair of radius arms and picking up a set of Thuren soft ride coil springs.